Mipa 2K-HS-Express-Filler FX 4 is a high-quality two-component filler for fast and economic car refinishing (express
technology) that generally doesn’t require oven drying. Mipa 2K-HS-Express-Filler FX 4 cures fast already at room
temperature (20 °C) and can be sanded after a drying of only 35 minutes (depending on coat thickness and
temperature). It is therefore possible to save significantly heating-related costs. In the same time, cycle times are
reduced since the painting process is not interrupted by heating intervals. If required, oven drying is also possible.
Hereby full sandability is obtained after a drying of approx. 10 minutes at 60 °C or 20 minutes at 40 °C plus cooling
time. Mipa 2K-HS-Express-Filler FX 4 is perfectly suitable for partial car coatings and spot repairs. After pre-treatment
with Mipa Vorreiniger Express, this filler provides very good adhesion on steel, iron, aluminium and galvanized
substrates.
Spreading rate: 3,8 - 4,2 m²/l (for 80 µm DFT)
technology) that generally doesn’t require oven drying. Mipa 2K-HS-Express-Filler FX 4 cures fast already at room
temperature (20 °C) and can be sanded after a drying of only 35 minutes (depending on coat thickness and
temperature). It is therefore possible to save significantly heating-related costs. In the same time, cycle times are
reduced since the painting process is not interrupted by heating intervals. If required, oven drying is also possible.
Hereby full sandability is obtained after a drying of approx. 10 minutes at 60 °C or 20 minutes at 40 °C plus cooling
time. Mipa 2K-HS-Express-Filler FX 4 is perfectly suitable for partial car coatings and spot repairs. After pre-treatment
with Mipa Vorreiniger Express, this filler provides very good adhesion on steel, iron, aluminium and galvanized
substrates.
Spreading rate: 3,8 - 4,2 m²/l (for 80 µm DFT)